Home / New Zealand
Safety gaps led to crash between truck and freight train at level crossing – TAIC report
19 Nov, 2026 06:22 PM 3 mins to read
Access to Herald Premium articles require a Premium subscription. Subscribe now to listen.
Already a subscriber?
Listening to articles is free for open-access content—explore other articles or learn more about text-to-speech.
A collision between a heavy truck and a freight train in Waikanae, on Kāpiti Coast, revealed level-crossing safety gaps, the Transport Accident Investigation Commission has found.
A freight train smashed into a truck at a level crossing on the Kāpiti Coast on the morning of October 15, 2025.
Footage showed the dramatic moment the truck driver managed to flee the vehicle with mere seconds to spare.
Both the truck and train drivers escaped uninjured, despite extensive damage to the truck , which was transporting a dump truck on its tray.
Advertise with NZME.
Now, a Transport Accident Investigation Commission (TAIC) report into the incident has found that the truck stopped unexpectedly on the crossing and the driver was unable to get it moving again due to an issue with its brakes.
Meanwhile, a northbound freight train approached. The train driver applied emergency braking, but the train struck the truck at 68km/h.
“The truck was stuck on the crossing because its trailer brakes were forced on, uncommanded by the driver, and remained on. During the tight turn from the main road onto the crossing, the air brake hoses were disconnected due to an incorrectly stowed broom,” the report found.
Train control was then not alerted to the blocked crossing as the train approached.
According to TAIC, the trucking operator did not believe he needed to contact train control. This belief “dated back to a 2014 permit” that allowed for no notification required. However, that exemption had been removed in May 2024, but KiwiRail did not tell the operator that it now had to contact train control.
TAIC stated in its report that KiwiRail treated “permit renewals and changes as administrative matters, without adequate operational risk assessment or a system to monitor compliance with permit conditions”.
Other issues found by TAIC while investigating the crash include the lack of an automatic system to detect an obstruction and alert train control, as well as a lack of an emergency number displayed at the crossing.
TAIC did add that the emergency number was not likely to have avoided this particular collision.
The commission has recommended that NZTA, KiwiRail and the NZ Heavy Haulage Association work together to identify everyone who relies on historical exemptions and needs to know about current permit obligations.
It also calls on operators of trucks and pilot vehicles to check that their current permits don’t rely on those historical perceptions.
KiwiRail’s safety risk assessment and monitoring of compliance were deemed inadequate by TAIC, and the commission urges the company to ensure appropriate operational personnel assess the risks.
It also calls on KiwiRail to put in place early-warning systems for level crossing emergencies as well as display emergency contact information prominently at the location.
As a result of this inquiry, the truck operator Goodmans has modified the air brake system used on its trucks.
KiwiRail has told TAIC it has plans to improve permit assessments, investigate early-warning technology and review the provision of emergency contact information.
Latest from New Zealand
‘I regret voting for the guy!’: Simeon Brown on Wayne Brown’s NZ-China remarks | Ryan Bridge TODAY
